Skip navigation

Category Archives: cello

Baroque cello update

It has been a shamefully long time since I wrote my last post and I apologise to anyone who has been waiting for  news of the cello. Although it has been progressing well, I became so absorbed in making it that I didn’t have enough energy left over to write about it. However, I did keep a camera nearby and I’ll sketch out the various stages of the instrument’s construction in photographs. Here’s the rib structure complete, with the corners trimmed.

dsc_0004-1

The top layer of the mould has been lifted off, exposing the inner sides of the ribs so that the linings can be glued into place.

dsc_0003-1

The lining of the C bout is morticed into the corner block

dsc_0004-2

And here is the rib structure complete and removed from the mould. I’m in the process of trimming the blocks down to their final size.

dsc_0013

Baroque cello

A friend of mine, a writer by trade, but also a talented amateur musician, has asked me to make him a cello. He plays in a baroque ensemble and his current instrument, which has a modern set up and metal wound strings, doesn’t  make the right sort of sound for music of that period.

Although I was delighted to be asked, I’d never made a baroque cello before and I needed to do some research before starting. It turns out that accurate information is hard to come by. Any number of books and websites will explain some of the differences between a baroque and a modern instruments: the lack of an end pin, the shallower neck angle, the broader and shorter fingerboard and the lower bridge. While this is all correct, it’s not detailed enough to be of much use to a would be maker. However, I’ve found out most of what I need to know through the generosity of an experienced professional cello maker who has made lots of instruments in the baroque style and who patiently explained what’s required.  Thanks to his advice, I  feel confident enough to make a start.

I’m going to re-use the three layer mould based on the Stradivari Forma B that I made for my last cello. Here are the corner blocks (willow) being glued into position.

And here they’ve been shaped, ready for the ribs to be glued in place.