At the Easter Instrument Making Course at West Dean this year, I had the pleasure of meeting Wouter Hilhorst, who was making a viola. Apart from admiring the precision and delicacy of his work, I was also interested to see that he had made his own planes, 2 of which were in the Japanese style. He let me take a quick photograph – see below.
We’ve recently had an email correspondence and he’s sent me some better photographs, and some details of how he made them. He gets the blades from the German company, Dick, and recommends their Japanese blades writing:
They are laminated and can be honed to a very sharp edge. As you probably know, blades for larger Japanese planes taper in thickness and wedge themselves in the more or less resilient oak plane bodies, which works surprisingly well. The small blades from Dick aren’t tapered in thickness, but only slightly in width. When I made them I thought I would wedge them widthwise, but the little recesses which grip the blade on both sides are enough, just by friction (although I had to glue two little strips of paper in the recesses of the smaller plane). The blade needs some space widthwise to be adjusted laterally.
He makes the planes from European oak or boxwood and chisels them out of a solid block. This is a technique that I intend to re-visit. All the planes that I’ve made recently followed the Krenov method in which you start by sawing two slices off the block to make the sides of the plane, shape the bed and throat from the middle section, and then glue it back together. There are some photographs of this method of construction here and here.
Finely Strung 