Skip navigation

Tag Archives: go-bars

I’ve been a fan of Roland Chadwick’s music since hearing a performance of his trio for classical guitar, Letter from LA, a few years ago. So I was delighted when he contacted me about a guitar that needed some attention.

It was a fine instrument too – a cedar top classical guitar made by an Australian guitar maker, Simon Marty, in 1988. Quite apart from being 25 years old, it had worked hard for its living and the thin cedar top had developed some nasty cracks in the widest part of the lower bout. Some of the internal braces had come unglued too, and the guitar was more or less unplayable. To make matters worse, someone had tried to repair the cracks with superglue.

This is what it looked like after I had scraped away most of the superglue.

DSC_6804

With a hand through the soundhole, I could feel that the cracked part of the soundboard had become detached from a long transverse bar running across the instrument under the bridge. This explained the multiple little dowels, which were a previous attempt to fix the problem. The only thing to do was cut out the damaged wood and replace it.

DSC_6822

I also needed to replace some missing braces and re-glue several that were beginning to come unstuck. The difficulty here was that the braces, constructed out of balsa wood and carbon fibre, were very thin and it was almost impossible to position conventional clamps accurately enough to hold them in place without distortion. In the end, I solved the problem by making a few spring-loaded miniature go-bars. Wedged between the back of the guitar and the top of the brace, they kept everything in place while the glue cured.

DSC_6955

DSC_6957

 

After re-polishing, it was ready to perform again. All well worth the trouble because, despite its age, it’s an excellent guitar which produces a big warm sound.

 

DSC_6834

Advertisements
%d bloggers like this: